Call Today: 716.741.1141 | E-mail:
PWM Solenoid
Model 205 Model 400 USB Model 400 Legacy Model 402Model 500

Proportional /
PWM Peak and Hold
Current Controlled
Model 805Model 205CC

Signal Conditioning
SGC 200SGC 400 / SGC 401 DFA 100

Motion Control Products SACT 100 SACT 101

Product Customizations


We Accept:

American Express MasterCard VISA

Model 805 PWM Proportional Valve/Solenoid Driver with Peak and Hold Modes

Model 805 PWM Controller/DriverThe Model 805 PWM Driver generates a high frequency, pulse width modulated, self-controlled variable duty cycle control output for proportional (current) controlled solenoid drive applications.  The Model 805 also provides operational modes for peak and hold solenoid drive.

  • applications
    • Proportional PWM Control
      • PWM drive for valves, solenoids, injectors
      • solenoid test and development and life cycle testing
    • Peak and Hold solenoid control
    • analog / USB to proportional control output signal conditioner
  • Proportional Valve Driver with PWM output
    • 3.5A maximum output current
    • maintains solenoid current independent of changes in solenoid coil resistance (self-heating) or operating voltage
  • Peak and Hold operating modes - Example Peak and Hold Waveform PDF
    • select from four peak and hold modes
    • three peak current ranges: 2A, 4A and 6A
    • peak current conrol with timeout feature
    • external or self-timed trigger (10 to 80Hz)
  • operating frequency up to 5000Hz
  • PWM dither frequency 50 to 500Hz
  • optically isolated input trigger
    • enable / disable for proportional control mode
    • trigger for peak and hold modes
  • analog / USB control of output current setpoint
  • fully differential analog imput (0 to 5V, 0 to 10V or 4 to 20mA)
    • over +/- 100V common mode rejection
  • remote setup and operation via USB
    • readout and save current settings in non-volatile memory
    • all settings modified using a PC GUI screen
    • digital control, no drift, high noise rejection - no potentiometers
    • access to advanced control parameters: PID constants, start-up ramp, min / max duty %
  • output monitor and status / fault indicator LEDs
  • power MOSFET output with low side drive control - PWM output sinks up to 4A at 12V
  • controller operates from 9V to 28V DC
  • Lead-Free, RoHS compliant
  • small form factor, 3.625 in. x 2.25 in. x 1 in.
  • rugged construction, high quality PCB using surface mount technology, designed for industrial temperature range operation (-40 deg C to +80 deg C)
  • warranty: 90 days for manufacturer defects
  • Order Number: PWMC-805 (see datasheet for available ordering options)

Documents and Downloads

PDFPWMC805 Data Sheet / User Guide Download PDF (PDF - 254KB)

PDFPWMC805 Installation Guide Download PDF (PDF - 100KB)

PDFAPM PWM 805 Control Application Download ZIP

Get Adobe Reader

Site created by ThomasNet Web Solutions
Applied Processor and Measurement, Inc. | High Quality, Value Minded Products... Providing Innovative Solutions